We understand
what you need!

The Thaler-Lader 2320 L/S, is identical to the 2220 L / S in terms of its body seize, one exception:  the minimum width of the 2320 is only 94 cm. The engine made by Yanmar with 20 HP is the same. And therefore, no exhaust gas treatment necessary for the 2320. So, you may wonder: why does this model exist? - The answer lies in the drive line, it is by far more modern, innovative and, above all, more powerful in thrust and speed.

Instead of the two hydraulic motors (1 per axle) on the axles, we now have a high-pressure radial piston motor that converts the hydraulic pressure into mechanical force for driving. A cardan shaft brings then the power to the front axle. This has two very decisive advantages: higher top speed: 15 km/h and a better thrust despite the small HP.

The minimum width of 94 cm and also the rather wide angle for the centre articulation angle of 55° allow working in confined spaces, no matter where you want to work,  either in stable with horses or on a cattle barn or on a construction site or behind the house in the garden, it is simply compact, handy and light with 1,5 - 1,6 to operating weight.

The 2320 is the only mini yard loader that can reach such a top speed without loss of thrust, a huge advantage for long distances between locations of operations.

Just for information: the model name provides information about the maximum height of shovel pivot pin of the lifting boom.

The abbreviation L / S means:

2320 L: short lifting boom on a low front chassis for high tipping loads at a low maximum height of the shovel pivot pin = 2.15 m

2320 S: Standard lifting boom on a standard front chassis for normal tipping loads at standard heights of the shovel pivot pin = 2.71 m

Technical performance data